Lederam WF
Lederam embodies the accuracy of the motion required to draw a line. The warm, softly coloured disks surround a LED module with an ultra-flat shape, which creates thin lamps and suspended forms with curved, sinuous lines.
Datasheet
Available versions
Type
Light source
240V - LED module 1x17W dimmable* / rated output 17W / energy class A+ / lumen 1700 / K 2700 / CRI >80
light source not EPREL registered
(110V - LED module 1x14W dimmable* / rated output 14W / energy class A+ / lumen 1540 / K 2700 / CRI 80)
Ø 25 cm
240V - LED module 1x25W dimmable* / rated output 25W / energy class E / lumen 2875 / K 2700 / CRI 90
EPREL registered light source, click here
(110V - LED module 1x28W dimmable* / rated output 28W / energy class A+ / lumen 2580 / K 2700 / CRI 80)
Power supply
base Ø 5,5×1,5 cm*,
disc Ø 17 cm,
H 6 cm ca.,
ledge 16 cm ca.
—
base Ø 5,5×1,5 cm*,
disc Ø 25 cm,
H 9 cm ca.,
ledge 24 cm ca.
*WARNING: the small size of the base is an aesthetical choice. As a consequence, installing the lamp could require extra care and patience. In order to simplify the installation and hide any wall irregularity, back plates (cod. BM1) are available on request
Dimensions
base Ø 5,5×1,5 cm*
disc Ø 17 cm
H 6 cm ca.
ledge 16 cm ca.
—
base Ø 5,5×1,5 cm*
disc Ø 25 cm
H 9 cm ca.
ledge 24 cm ca.
*WARNING: the small size of the base is an aesthetical choice. As a consequence, installing the lamp could require extra care and patience. In order to simplify the installation and hide any wall irregularity, back plates (cod. BM1) are available on request